Eicher Mammut 3020 HR A or Lamborghini R-653 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Mammut 3020 HR A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-653 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Eicher Mammut 3020 HR A suits loader and hydraulic implement work better on this data: 22% (7.0 L/min / 1.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Eicher Mammut 3020 HR A and Lamborghini R-653 (DT), with the call on each
QuestionMammut 3020 HR AR-653 (DT)Call
Which puts more power through the PTO shaft?45.4 kW (60.9 hp)Traktorenlexikon, “Eicher 3020 Mammut HR A”45.6 kW (61.2 hp)Traktorenlexikon, “Lamborghini 653 DT”Not comparableNot comparable on power at the PTO shaft: the Mammut 3020 HR A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-653 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Mammut 3020 HR A and the R-653 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Mammut 3020 HR A and the R-653 (DT).
Which pumps more oil for implements?39 L/min (10.3 gpm)Traktorenlexikon, “Eicher 3020 Mammut HR A”32.0 L/min (8.5 gpm)Traktorenlexikon, “Lamborghini 653 DT”AheadThe Eicher Mammut 3020 HR A has 22% more hydraulic flow (7.0 L/min / 1.8 gpm) than the Lamborghini R-653 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,700 kg (5,952 lb)Traktorenlexikon, “Eicher 3020 Mammut HR A”2,814 kg (6,204 lb)Traktorenlexikon, “Lamborghini 653 DT”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,065 kg (6,757 lb)Traktorenlexikon, “Eicher 3020 Mammut HR A”2,580 kg (5,688 lb)Traktorenlexikon, “Lamborghini 653 DT”Ahead (a fact, not an advantage)The Eicher Mammut 3020 HR A is 19% heavier (485 kg / 1,069 lb) than the Lamborghini R-653 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,300 kg (9,480 lb)Traktorenlexikon, “Eicher 3020 Mammut HR A”—No figureNo call on maximum permissible mass: no figure on record for the R-653 (DT).
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Eicher 3020 Mammut HR A”12 to 16 forwardTraktorenlexikon, “Lamborghini 653 DT”DifferTransmissions differ in kind: the Eicher Mammut 3020 HR A is stepless (CVT) and the Lamborghini R-653 (DT) has 12 to 16 forward gears — not called.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Mammut 3020 HR A and the R-653 (DT).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Eicher 3020 Mammut HR A”25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini 653 DT”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?590/1000 rpmTraktorenlexikon, “Eicher 3020 Mammut HR A”540/1000 rpmTraktorenlexikon, “Lamborghini 653 DT”AheadThe Lamborghini R-653 (DT) offers 540 rpm at the PTO, which the Eicher Mammut 3020 HR A does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the Mammut 3020 HR A and the R-653 (DT).
Which drives on both axles?4WDTraktorenlexikon, “Eicher 3020 Mammut HR A”Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 653 DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1970–19721980–1985Ahead (a fact, not an advantage)The Lamborghini R-653 (DT) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Eicher Mammut 3020 HR A has 22% more hydraulic flow (7.0 L/min / 1.8 gpm) than the Lamborghini R-653 (DT) (both pump flow, as stated by the source).
  • The Eicher Mammut 3020 HR A is 19% heavier (485 kg / 1,069 lb) than the Lamborghini R-653 (DT) (both unladen weight, as stated by the source).
  • The Lamborghini R-653 (DT) offers 540 rpm at the PTO, which the Eicher Mammut 3020 HR A does not (as stated by the sources).
  • The Lamborghini R-653 (DT) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Eicher Mammut 3020 HR A is stepless (CVT) and the Lamborghini R-653 (DT) has 12 to 16 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Mammut 3020 HR A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-653 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources