10 material differences · fewer than 12
Tractor oneEicher Mammut 3020 HR A1970–1972No measured PTO figureTractor twoFord 5000 (A)1964–1975No measured PTO figure
Which should you choose?
Read our verdict on the Mammut 3020 HR A and the 5000 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Mammut 3020 HR A | 5000 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.9 hp | 61.2 hp | — |
| Engine declared | Eicher EDK 4 | Ford ND 2.508 E or 2.514 E | differs |
| Displacement declared | 3.93 L | — | — |
| Maximum torque declared | 183 lb·ft · 248 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4–17.4 mph · 20–28 km/h | differs |
| Clutch declared | Foot-operated single-plate dry clutch in flywheel housing as PTO clutch | Pedal-operated dry BORG & BECK single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.3 gpm · 39 L/min | 6.1 gpm · 23.2 L/min | +68% Mammut 3020 HR A |
| Pressure declared | 2,489 psi · 172 bar | — | — |
| Rear PTO speeds declared | 590/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,757 lb · 3,065 kg | 5,553 lb · 2,519 kg | +22% Mammut 3020 HR A |
| Maximum permissible mass declared | 9,480 lb · 4,300 kg | — | — |
| Wheelbase declared | — | 87.5 in · 2,223 mm | — |
| Length declared | 141.7 in · 3,600 mm | 142.9 in · 3,630 mm | — |
| Width declared | 77.6 in · 1,970 mm | 68.1–96.1 in · 1,730–2,440 mm | differs |
| Ground clearance declared | 11.0 in · 280 mm | 15.5 in · 394 mm | +41% 5000 (A) |
| Turning radius, braked declared | 15.7 ft · 4.80 m | 11.1 ft · 3.38 m | +42% Mammut 3020 HR A |
| Fuel tank declared | 100.4 qt · 95 L | 79.8 qt · 75.5 L | +26% Mammut 3020 HR A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher Mammut 3020 HR A sources
- Source: Traktorenlexikon, “Eicher 3020 Mammut HR A”
- Source: Traktorenlexikon, “Eicher 3019 Mammut HR”
Ford 5000 (A) sources
- Source: Traktorenlexikon, “Ford 5000”