Dexheimer Allrad 345 N vs John Deere-LANZ 710

10 material differences · fewer than 12

Tractor one

1976–1985

No measured PTO figure

Tractor two

1965–1967

No measured PTO figure

Which should you choose?

Read our verdict on the Allrad 345 N and the 710 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 1 fields identical or within 5%, which is not counted as material

Dexheimer Allrad 345 N and John Deere-LANZ 710, field by field
Field	Allrad 345 N	710	Gap
Engine
Engine power, claimed claimed	50 hp	49.3 hp	—
Engine declared	—	John Deere 202 D 23 L	—
Displacement declared	—	3.32 L	—
Maximum torque declared	—	132 lb·ft · 178 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–15.5 mph · 20–25 km/h	differs
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41 L/min	4.1 gpm · 15.6 L/min	+163% Allrad 345 N
Pressure declared	—	2,162 psi · 149 bar	—
Three-point lift at ends declared	—	3,968 lb · 1,800 kg	—
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	3,583 lb · 1,625 kg	4,925 lb · 2,234 kg	+37% 710
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	81.1 in · 2,060 mm	86.6 in · 2,200 mm	+7% 710
Length declared	114.2 in · 2,900 mm	139.0 in · 3,530 mm	+22% 710
Width declared	39.8 in · 1,010 mm	70.5 in · 1,790 mm	+77% 710
Height declared	76.8 in · 1,950 mm	68.9 in · 1,750 mm	+11% Allrad 345 N
Ground clearance declared	10.6 in · 270 mm	19.7 in · 500 mm	+85% 710
Turning radius, braked declared	6.9 ft · 2.10 m	10.2 ft · 3.10 m	+48% 710
Fuel tank declared	52.8 qt · 50 L	74.0 qt · 70.0 L	+40% 710

Source

Source