5 material differences · fewer than 12
Tractor oneDeutz (KHD) MTZ 1201926–1929No measured PTO figureTractor twoInternational Harvester Farmall H/HV1939–1953No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (57%); they were not built in overlapping years (1926–1929; 1939–1953). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | MTZ 120 | Farmall H/HV | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 26.7 hp | 25.6 hp | — |
| Engine declared | — | INTERNATIONAL HARVESTER C-153 | — |
| Displacement declared | — | 2.49 L | — |
| Transmission | |||
| Top speed declared | 3.9 mph · 6.3 km/h | 16.2 mph · 26 km/h | +313% Farmall H/HV |
| Clutch declared | — | Pedal operated dry Rockford single disc clutch | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 600 | 541 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,842 lb · 2,650 kg | 3,726 lb · 1,690 kg | +57% MTZ 120 |
| Wheelbase declared | 70.1 in · 1,780 mm | 88.5 in · 2,248 mm | +26% Farmall H/HV |
| Length declared | 121.1 in · 3,075 mm | 125.2 in · 3,181 mm | — |
| Width declared | 70.9 in · 1,800 mm | 75.0–90.7 in · 1,905–2,305 mm | differs |
| Ground clearance declared | — | 24.6 in · 625 mm | — |
| Turning radius, braked declared | — | 8.1 ft · 2.46 m | — |
| Fuel tank declared | — | 50.0 qt · 47.3 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) MTZ 120 sources
- Source: Traktorenlexikon, “Deutz MTZ 120”
International Harvester Farmall H/HV sources
- Source: Traktorenlexikon, “Farmall Farmall-H”
- Source: Traktorenlexikon, “McCormick Farmall-H”
- Source: Traktorenlexikon, “IHC Farmall-H”