Deutz (KHD) Intrac 2004 vs International Harvester Hydro 70

9 material differences · fewer than 12

Tractor one

1978–1989

No measured PTO figure

Tractor two

1973–1976

No measured PTO figure

Which should you choose?

Read our verdict on the Intrac 2004 and the Hydro 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz (KHD) Intrac 2004 and International Harvester Hydro 70, field by field
Field	Intrac 2004	Hydro 70	Gap
Engine
Engine power, claimed claimed	68.7 hp	69.1 hp	—
Engine declared	KHD F4L 912 H	INTERNATIONAL HARVESTER C-291	differs
Displacement declared	3.77 L	—	—
Maximum torque declared	175 lb·ft · 237 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	21.1 mph · 34 km/h	differs
Clutch declared	—	Pedal operated ceramic clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.4 gpm · 47.1 L/min	12.0 gpm · 45.5 L/min	—
Pressure declared	2,538 psi · 175 bar	—	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,055 lb · 3,200 kg	8,439 lb · 3,828 kg	+20% Hydro 70
Maximum permissible mass declared	11,795 lb · 5,350 kg	—	—
Wheelbase declared	86.6 in · 2,200 mm	103.0 in · 2,616 mm	+19% Hydro 70
Length declared	140.2 in · 3,560 mm	161.0 in · 4,089 mm	+15% Hydro 70
Width declared	79.7 in · 2,025 mm	87.0 in · 2,210 mm	+9% Hydro 70
Height declared	108.7 in · 2,760 mm	77.0 in · 1,956 mm	+41% Intrac 2004
Ground clearance declared	14.0 in · 355 mm	21.0 in · 533 mm	+50% Hydro 70
Turning radius, braked declared	—	12.0 ft · 3.66 m	—
Fuel tank declared	—	123.9 qt · 117.3 L	—

Source

Source