13 material differences
Tractor oneDeutz (KHD) Intrac 20021972–1974No measured PTO figureTractor twoSOMECA 500 Special (TD)1972–1983No measured PTO figure
Which should you choose?
Read our verdict on the Intrac 2002 and the 500 Special (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Intrac 2002 | 500 Special (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 50.0 hp | 49.3 hp | — |
| Engine declared | KHD F3L 912 H | FIAT-IVECO 8035.02.203/303 | differs |
| Displacement declared | 2.83 L | 2.59 L | +9% Intrac 2002 |
| Maximum torque declared | 135 lb·ft · 182 N·m | 116 lb·ft · 157 N·m | +16% Intrac 2002 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Independent dry double clutch | dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | 2,843 psi · 196 bar | +12% 500 Special (TD) |
| Three-point lift, at the coupling points declared | 4,630 lb · 2,100 kg | 3,417 lb · 1,550 kg | +35% Intrac 2002 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,908 lb · 2,680 kg | 4,145 lb · 1,880 kg | +43% Intrac 2002 |
| Wheelbase declared | 84.6 in · 2,150 mm | 76.9 in · 1,953 mm | +10% Intrac 2002 |
| Length declared | 137.8 in · 3,500 mm | 119.7 in · 3,041 mm | +15% Intrac 2002 |
| Width declared | 74.4 in · 1,890 mm | 65.4–87.8 in · 1,660–2,230 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | 18.1 in · 459 mm | — |
| Turning radius, braked declared | 12.1 ft · 3.70 m | 9.7 ft · 2.95 m | +25% Intrac 2002 |
| Fuel tank declared | 91.9 qt · 87 L | 57.1 qt · 54.0 L | +61% Intrac 2002 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) Intrac 2002 sources
- Source: Traktorenlexikon, “Deutz INTRAC 2002”
SOMECA 500 Special (TD) sources
- Source: Traktorenlexikon, “Someca 500 S”