Deutz-Fahr DX 80 or Hanomag Brillant 701 A (S)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DX 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Brillant 701 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr DX 80 suits loader and hydraulic implement work better on this data: 27% (800 kg / 1,764 lb) more three-point lift.
- The Deutz-Fahr DX 80 suits road haulage better on this data: 10% (2.9 km/h / 1.8 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DX 80 | Brillant 701 A (S) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 55 kW (74 hp)Traktorenlexikon, “Deutz-Fahr DX 80” | 55 kW (74 hp)Traktorenlexikon, “Hanomag Brillant 701 A (S)” | Not comparableNot comparable on power at the PTO shaft: the DX 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Brillant 701 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DX 80 and the Brillant 701 A (S). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DX 80 and the Brillant 701 A (S). |
| Which pumps more oil for implements? | — | — | No figureNo call on hydraulic flow: no figure on record for the DX 80 and the Brillant 701 A (S). |
| Which lifts more on the three-point hitch? | 3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr DX 80” | 3,000 kg (6,614 lb)Traktorenlexikon, “Hanomag Brillant 701 A (S)” | AheadThe Deutz-Fahr DX 80 has 27% more lift (800 kg / 1,764 lb) than the Hanomag Brillant 701 A (S) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,600 kg (7,937 lb)Traktorenlexikon, “Deutz-Fahr DX 80” | 3,730 kg (8,223 lb) to 3,820 kg (8,422 lb)Traktorenlexikon, “Hanomag Brillant 701 A (S)” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the DX 80 and the Brillant 701 A (S). |
| Which has the wider choice of gears? | 15 to 18Traktorenlexikon, “Deutz-Fahr DX 80” | 12Traktorenlexikon, “Hanomag Brillant 701 A (S)” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the DX 80 and the Brillant 701 A (S). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr DX 80” | 19.87 km/h (12.3 mph) to 27.15 km/h (16.9 mph)Traktorenlexikon, “Hanomag Brillant 701 A (S)” | AheadThe Deutz-Fahr DX 80 has 10% more top speed (2.9 km/h / 1.8 mph) than the Hanomag Brillant 701 A (S) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr DX 80” | 540/1000 rpmTraktorenlexikon, “Hanomag Brillant 701 A (S)” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the DX 80 and the Brillant 701 A (S). |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr DX 80” | 4WDTraktorenlexikon, “Hanomag Brillant 701 A (S)” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1983 | 1969–1970 | Ahead (a fact, not an advantage)The Deutz-Fahr DX 80 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr DX 80 has 27% more lift (800 kg / 1,764 lb) than the Hanomag Brillant 701 A (S) (both lift at the hitch ends, as stated by the source).
- The Deutz-Fahr DX 80 has 10% more top speed (2.9 km/h / 1.8 mph) than the Hanomag Brillant 701 A (S) (both top speed forward, as stated by the source).
- The Deutz-Fahr DX 80 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the DX 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Brillant 701 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources