14 material differences
Tractor oneDeutz-Fahr DX 8.301983–1988No measured PTO figureTractor twoMassey Ferguson MF 18001971–1975No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (27%); they were not built in overlapping years (1983–1988; 1971–1975). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
14 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | DX 8.30 | MF 1800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 217 hp | 207.3 hp | — |
| Engine declared | KHD BF6L 413 FR | Caterpillar 3160 | differs |
| Displacement declared | 9.57 L | 10.42 L | +9% MF 1800 |
| Maximum torque declared | 597 lb·ft · 810 N·m | 477 lb·ft · 647 N·m | +25% DX 8.30 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated wet ZF multi-disc clutch with oil-hydraulic Voith turbo coupling | Pedal-operated dry Borg & Beck single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 21.4 gpm · 81 L/min | 25.0 gpm · 94.6 L/min | +17% MF 1800 |
| Three-point lift, at the coupling points declared | 17,968 lb · 8,150 kg | 10,141 lb · 4,600 kg | +77% DX 8.30 |
| Rear PTO speeds declared | 1084 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,393 lb · 9,250 kg | 16,094 lb · 7,300 kg | +27% DX 8.30 |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | 18,739 lb · 8,500 kg | +41% DX 8.30 |
| Wheelbase declared | 118.6 in · 3,012 mm | 119.7 in · 3,040 mm | — |
| Length declared | 213.7 in · 5,427 mm | 244.1 in · 6,200 mm | +14% MF 1800 |
| Width declared | 98.4 in · 2,500 mm | 98.4 in · 2,500 mm | — |
| Height, over the exhaust declared | 125.6 in · 3,190 mm | 137.8 in · 3,500 mm | +10% MF 1800 |
| Ground clearance declared | 22.6 in · 575 mm | 17.7 in · 450 mm | +28% DX 8.30 |
| Turning radius, braked declared | — | 17.0 ft · 5.18 m | — |
| Fuel tank declared | 422.7 qt · 400 L | 479.7 qt · 454 L | +14% MF 1800 |
Deutz-Fahr DX 8.30 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 8.30”
- Source: Traktorenlexikon, “Deutz-Fahr DX 230”
Massey Ferguson MF 1800 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 1800”