Deutz-Fahr DX 6.50 A vs ZETOR 14145

10 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.50 A and the 14145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.50 A and ZETOR 14145, field by field
Field	DX 6.50 A	14145	Gap
Engine
Engine power, claimed claimed	135.2 hp	138 hp	—
Engine declared	KHD BF6L 913.101T	ZETOR Z-8602.11	differs
Displacement declared	6.13 L	6.84 L	+12% 14145
Maximum torque declared	375 lb·ft · 508 N·m	375 lb·ft · 508 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry ZTS single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.6 L/min	12.2 gpm · 46.2 L/min	+25% DX 6.50 A
Pressure declared	3,481 psi · 240 bar	2,828 psi · 195 bar	+23% DX 6.50 A
Three-point lift at ends declared	14,330 lb · 6,500 kg	11,039 lb · 5,007 kg	+30% DX 6.50 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,081 lb · 5,480 kg	11,244 lb · 5,100 kg	+7% DX 6.50 A
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	106.3 in · 2,700 mm	—
Length declared	179.5 in · 4,560 mm	183.7 in · 4,665 mm	—
Width declared	93.3 in · 2,370 mm	86.2 in · 2,190 mm	+8% DX 6.50 A
Height declared	109.6 in · 2,785 mm	106.1 in · 2,695 mm	—
Ground clearance declared	22.4 in · 570 mm	12.6 in · 320 mm	+78% DX 6.50 A
Turning radius, braked declared	17.0 ft · 5.17 m	18.1 ft · 5.52 m	+7% 14145
Fuel tank declared	158.5 qt · 150 L	206.1 qt · 195.0 L	+30% 14145

Source

Source