Deutz-Fahr DX 6.50 A vs VALMET 8350 HiTech

11 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.50 A and the 8350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.50 A and VALMET 8350 HiTech, field by field
Field	DX 6.50 A	8350 HiTech	Gap
Engine
Engine power, claimed claimed	135.2 hp	133.2 hp	—
Engine declared	KHD BF6L 913.101T	VALMET 620 DSRIE	differs
Displacement declared	6.13 L	6.59 L	+8% 8350 HiTech
Maximum torque declared	375 lb·ft · 508 N·m	471 lb·ft · 639 N·m	+26% 8350 HiTech
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	—	Pedal-operated dry Fichtel & Sachs single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.6 L/min	20.2 gpm · 76.4 L/min	+33% 8350 HiTech
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% DX 6.50 A
Three-point lift at ends declared	14,330 lb · 6,500 kg	14,991 lb · 6,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,081 lb · 5,480 kg	12,610 lb · 5,720 kg	—
Maximum permissible mass declared	17,637 lb · 8,000 kg	19,842 lb · 9,000 kg	+13% 8350 HiTech
Wheelbase declared	106.4 in · 2,703 mm	100.7 in · 2,558 mm	+6% DX 6.50 A
Length declared	179.5 in · 4,560 mm	194.5 in · 4,940 mm	+8% 8350 HiTech
Width declared	93.3 in · 2,370 mm	92.0 in · 2,338 mm	—
Height declared	109.6 in · 2,785 mm	111.2 in · 2,825 mm	—
Ground clearance declared	22.4 in · 570 mm	18.1 in · 460 mm	+24% DX 6.50 A
Turning radius, braked declared	17.0 ft · 5.17 m	—	—
Fuel tank declared	158.5 qt · 150 L	174.4 qt · 165.0 L	+10% 8350 HiTech

Source

Source