Deutz-Fahr DX 6.50 A vs SAME Antares II 130

10 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

from 1996

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.50 A and the Antares II 130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.50 A and SAME Antares II 130, field by field
Field	DX 6.50 A	Antares II 130	Gap
Engine
Engine power, claimed claimed	135.2 hp	130.2 hp	—
Engine declared	KHD BF6L 913.101T	SAME 1000.6 AT	differs
Displacement declared	6.13 L	6.00 L	—
Maximum torque declared	375 lb·ft · 508 N·m	346 lb·ft · 469 N·m	+8% DX 6.50 A
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal operated dry SLH single disc clutch	—
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.6 L/min	15.2 gpm · 57.5 L/min	—
Pressure declared	3,481 psi · 240 bar	2,176 psi · 150 bar	+60% DX 6.50 A
Three-point lift at ends declared	14,330 lb · 6,500 kg	13,669 lb · 6,200 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	12,081 lb · 5,480 kg	10,692 lb · 4,850 kg	+13% DX 6.50 A
Maximum permissible mass declared	17,637 lb · 8,000 kg	17,857 lb · 8,100 kg	—
Wheelbase declared	106.4 in · 2,703 mm	108.3 in · 2,750 mm	—
Length declared	179.5 in · 4,560 mm	180.7 in · 4,590 mm	—
Width declared	93.3 in · 2,370 mm	87.4 in · 2,220 mm	+7% DX 6.50 A
Height declared	109.6 in · 2,785 mm	110.4 in · 2,805 mm	—
Ground clearance declared	22.4 in · 570 mm	17.7 in · 450 mm	+27% DX 6.50 A
Turning radius, braked declared	17.0 ft · 5.17 m	12.0 ft · 3.65 m	+42% DX 6.50 A
Fuel tank declared	158.5 qt · 150 L	253.6 qt · 240.0 L	+60% Antares II 130

Source

Source