Deutz-Fahr DX 6.50 A vs Lamborghini 135 DT Formula

10 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.50 A and the 135 DT Formula → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.50 A and Lamborghini 135 DT Formula, field by field
Field	DX 6.50 A	135 DT Formula	Gap
Engine
Engine power, claimed claimed	135.2 hp	130.2 hp	—
Engine declared	KHD BF6L 913.101T	SAME 1000.6 WT	differs
Displacement declared	6.13 L	6.00 L	—
Maximum torque declared	375 lb·ft · 508 N·m	279 lb·ft · 378 N·m	+34% DX 6.50 A
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-actuated dry SLH single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.6 L/min	16.1 gpm · 60.9 L/min	+6% 135 DT Formula
Pressure declared	3,481 psi · 240 bar	2,176 psi · 150 bar	+60% DX 6.50 A
Three-point lift at ends declared	14,330 lb · 6,500 kg	11,380 lb · 5,162 kg	+26% DX 6.50 A
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	12,081 lb · 5,480 kg	10,318 lb · 4,680 kg	+17% DX 6.50 A
Maximum permissible mass declared	17,637 lb · 8,000 kg	17,857 lb · 8,100 kg	—
Wheelbase declared	106.4 in · 2,703 mm	108.3 in · 2,750 mm	—
Length declared	179.5 in · 4,560 mm	174.4 in · 4,430 mm	—
Width declared	93.3 in · 2,370 mm	87.0 in · 2,210 mm	+7% DX 6.50 A
Height declared	109.6 in · 2,785 mm	111.0 in · 2,820 mm	—
Ground clearance declared	22.4 in · 570 mm	22.2 in · 565 mm	—
Turning radius, braked declared	17.0 ft · 5.17 m	17.8 ft · 5.42 m	—
Fuel tank declared	158.5 qt · 150 L	243.0 qt · 230.0 L	+53% 135 DT Formula

Source

Source