Deutz-Fahr DX 6.50 A vs Hürlimann H-6135 Elite

8 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.50 A and the H-6135 Elite → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.50 A and Hürlimann H-6135 Elite, field by field
Field	DX 6.50 A	H-6135 Elite	Gap
Engine
Engine power, claimed claimed	135.2 hp	130 hp	—
Engine declared	KHD BF6L 913.101T	Hürlimann H-1000.6 WT	differs
Displacement declared	6.13 L	6.00 L	—
Maximum torque declared	375 lb·ft · 508 N·m	361 lb·ft · 490 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry SLH single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	15.2 gpm · 57.6 L/min	15.2 gpm · 57.5 L/min	—
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% DX 6.50 A
Three-point lift at ends declared	14,330 lb · 6,500 kg	3,902 lb · 1,770 kg	+267% DX 6.50 A
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	12,081 lb · 5,480 kg	11,993 lb · 5,440 kg	—
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	108.3 in · 2,750 mm	—
Length declared	179.5 in · 4,560 mm	202.4 in · 5,140 mm	+13% H-6135 Elite
Width declared	93.3 in · 2,370 mm	88.6 in · 2,250 mm	+5% DX 6.50 A
Height declared	109.6 in · 2,785 mm	113.8 in · 2,890 mm	—
Ground clearance declared	22.4 in · 570 mm	20.5 in · 520 mm	+10% DX 6.50 A
Turning radius, braked declared	17.0 ft · 5.17 m	17.8 ft · 5.42 m	—
Fuel tank declared	158.5 qt · 150 L	243.0 qt · 230.0 L	+53% H-6135 Elite

Source

Source