Deutz-Fahr DX 4.70 A vs UTB U-833 DT

9 material differences · fewer than 12

Tractor one

1983–1989

No measured PTO figure

Tractor two

1994–2004

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.70 A and the U-833 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.70 A and UTB U-833 DT, field by field
Field	DX 4.70 A	U-833 DT	Gap
Engine
Engine power, claimed claimed	88.4 hp	87.8 hp	—
Engine declared	KHD BF4L 913	UTB 2404.062	differs
Displacement declared	4.09 L	3.76 L	+9% DX 4.70 A
Maximum torque declared	236 lb·ft · 320 N·m	232 lb·ft · 314 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	12.9 gpm · 48.8 L/min	10.6 gpm · 40.0 L/min	+22% DX 4.70 A
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,193 lb · 4,170 kg	8,907 lb · 4,040 kg	—
Maximum permissible mass declared	13,669 lb · 6,200 kg	—	—
Wheelbase declared	94.5 in · 2,400 mm	90.2 in · 2,291 mm	—
Length declared	164.2 in · 4,170 mm	163.4 in · 4,150 mm	—
Width declared	90.7 in · 2,304 mm	76.3 in · 1,939 mm	+19% DX 4.70 A
Height declared	103.9 in · 2,640 mm	109.8 in · 2,790 mm	+6% U-833 DT
Ground clearance declared	17.9 in · 455 mm	13.8 in · 350 mm	+30% DX 4.70 A
Turning radius, braked declared	13.7 ft · 4.17 m	14.4 ft · 4.40 m	+6% U-833 DT
Fuel tank declared	132.1 qt · 125 L	105.7 qt · 100.0 L	+25% DX 4.70 A

Source

Source