Deutz-Fahr DX 4.70 A vs SAME Explorer 90 (DT)

10 material differences · fewer than 12

Tractor one

1983–1989

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.70 A and the Explorer 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.70 A and SAME Explorer 90 (DT), field by field
Field	DX 4.70 A	Explorer 90 (DT)	Gap
Engine
Engine power, claimed claimed	88.4 hp	88.8 hp	—
Engine declared	KHD BF4L 913	SAME 1000.4 A Turbo	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	236 lb·ft · 320 N·m	224 lb·ft · 304 N·m	+5% DX 4.70 A
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Pedal operated dry SAME single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.9 gpm · 48.8 L/min	9.5 gpm · 35.8 L/min	+36% DX 4.70 A
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,193 lb · 4,170 kg	6,614 lb · 3,000 kg	+39% DX 4.70 A
Maximum permissible mass declared	13,669 lb · 6,200 kg	—	—
Wheelbase declared	94.5 in · 2,400 mm	95.1 in · 2,415 mm	—
Length declared	164.2 in · 4,170 mm	145.2 in · 3,687 mm	+13% DX 4.70 A
Width declared	90.7 in · 2,304 mm	73.6 in · 1,870 mm	+23% DX 4.70 A
Height declared	103.9 in · 2,640 mm	102.1 in · 2,593 mm	—
Ground clearance declared	17.9 in · 455 mm	20.5 in · 520 mm	+14% Explorer 90 (DT)
Turning radius, braked declared	13.7 ft · 4.17 m	9.6 ft · 2.94 m	+42% DX 4.70 A
Fuel tank declared	132.1 qt · 125 L	116.2 qt · 110.0 L	+14% DX 4.70 A

Source

Source