13 material differences

Tractor oneDeutz-Fahr DX 4.70 A1983–1989No measured PTO figureTractor twoFiat 90-90 (DT)1984–1991No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.70 A and the 90-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.70 A and Fiat 90-90 (DT), field by field
Field	DX 4.70 A	90-90 (DT)	Gap
Engine
Engine power, claimed claimed	88.4 hp	88.8 hp	—
Engine declared	KHD BF4L 913	FIAT-IVECO 8055.05.200	differs
Displacement declared	4.09 L	4.88 L	+19% 90-90 (DT)
Maximum torque declared	236 lb·ft · 320 N·m	217 lb·ft · 294 N·m	+9% DX 4.70 A
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Dry VALEO or LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	12.9 gpm · 48.8 L/min	11.6 gpm · 44.0 L/min	+11% DX 4.70 A
Pressure declared	3,481 psi · 240 bar	3,046–3,118 psi · 210–215 bar	differs
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,193 lb · 4,170 kg	7,848 lb · 3,560 kg	+17% DX 4.70 A
Maximum permissible mass declared	13,669 lb · 6,200 kg	13,448 lb · 6,100 kg	—
Wheelbase declared	94.5 in · 2,400 mm	97.2 in · 2,469 mm	—
Length declared	164.2 in · 4,170 mm	151.6 in · 3,850 mm	+8% DX 4.70 A
Width declared	90.7 in · 2,304 mm	82.7 in · 2,100 mm	+10% DX 4.70 A
Height, over the cab declared	103.9 in · 2,640 mm	103.5 in · 2,630 mm	—
Ground clearance declared	17.9 in · 455 mm	20.9 in · 530 mm	+16% 90-90 (DT)
Turning radius, braked declared	13.7 ft · 4.17 m	12.0 ft · 3.65 m	+14% DX 4.70 A
Fuel tank declared	132.1 qt · 125 L	98.3 qt · 93.0 L	+34% DX 4.70 A

Source

Source