Deutz-Fahr DX 4.30 vs URSUS C-385 (Ursus)

11 material differences · fewer than 12

Tractor one

1983–1989

No measured PTO figure

Tractor two

1969–1983

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.30 and the C-385 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.30 and URSUS C-385 (Ursus), field by field
Field	DX 4.30	C-385	Gap
Engine
Engine power, claimed claimed	73.6 hp	75.0 hp	—
Engine declared	KHD F4L 913	T.S.-MARTIN Z-8001 or Z-7501	differs
Displacement declared	4.09 L	4.56 L	+12% C-385
Maximum torque declared	196 lb·ft · 266 N·m	185 lb·ft · 251 N·m	+6% DX 4.30
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	—	Pedal-operated dry ZBROJOVKA-BRNO single-plate clutch type 13" 325 mm disc diameter	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	8.5 gpm · 32.0 L/min	—
Pressure declared	—	2,277 psi · 157 bar	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	5,181 lb · 2,350 kg	+62% DX 4.30
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	7,771 lb · 3,525 kg	+11% DX 4.30
Wheelbase declared	94.5 in · 2,400 mm	93.9 in · 2,385 mm	—
Length declared	163.0 in · 4,140 mm	155.3 in · 3,945 mm	—
Width declared	90.6 in · 2,300 mm	76.0 in · 1,930 mm	+19% DX 4.30
Height declared	103.0 in · 2,615 mm	97.8 in · 2,484 mm	+5% DX 4.30
Ground clearance declared	16.7 in · 425 mm	13.8 in · 350 mm	+21% DX 4.30
Turning radius, braked declared	13.7 ft · 4.17 m	9.9 ft · 3.03 m	+38% DX 4.30
Fuel tank declared	132.1 qt · 125 L	95.1 qt · 90.0 L	+39% DX 4.30

Source

Source