3 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 4.301983–1989No measured PTO figureTractor twoHanomag Brillant 701 A (S)1969–1970No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1983–1989; 1969–1970). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
3 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | DX 4.30 | Brillant 701 A (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 73.6 hp | 74 hp | — |
| Engine declared | KHD F4L 913 | — | — |
| Displacement declared | 4.09 L | — | — |
| Maximum torque declared | 196 lb·ft · 266 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 12.3–16.9 mph · 19.87–27.15 km/h | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,642 lb · 3,920 kg | 8,223–8,422 lb · 3,730–3,820 kg | — |
| Wheelbase declared | 94.5 in · 2,400 mm | 97.4 in · 2,475 mm | — |
| Length declared | 163.0 in · 4,140 mm | 157.1 in · 3,990 mm | — |
| Width declared | 90.6 in · 2,300 mm | 80.7 in · 2,050 mm | +12% DX 4.30 |
| Ground clearance declared | 16.7 in · 425 mm | 12.6 in · 320 mm | +33% DX 4.30 |
| Turning radius, braked declared | 13.7 ft · 4.17 m | 13.5 ft · 4.10 m | — |
| Fuel tank declared | 132.1 qt · 125 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 4.30 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 4.30”
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”
Hanomag Brillant 701 A (S) sources
- Source: Traktorenlexikon, “Hanomag Brillant 701 A (S)”