Deutz-Fahr DX 4.30 vs Fiat TL 80 (DT)

9 material differences · fewer than 12

Tractor one

Deutz-Fahr DX 4.30

1983–1989

No measured PTO figure

Tractor two

Fiat TL 80 (DT)

1998–2004

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1983–1989; 1998–2004). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.30 and Fiat TL 80 (DT), field by field
FieldDX 4.30TL 80 (DT)Gap
Engine
Engine power, claimed claimed73.6 hp74.0 hp
Engine declaredKHD F4L 913New Holland-Iveco 8045.05 Rdiffers
Displacement declared4.09 L3.91 L
Maximum torque declared196 lb·ft · 266 N·m188 lb·ft · 255 N·m
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h
Hydraulics & hitch
Pump flow declared15.9 gpm · 60.0 L/min
Pressure declared2,103 psi · 145 bar
Three-point lift at ends declared8,378 lb · 3,800 kg7,385 lb · 3,350 kg+13% DX 4.30
Rear PTO speeds declared540/1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,642 lb · 3,920 kg9,149 lb · 4,150 kg+6% TL 80 (DT)
Maximum permissible mass declared11,464 lb · 5,200 kg
Wheelbase declared94.5 in · 2,400 mm92.2 in · 2,342 mm
Length declared163.0 in · 4,140 mm168.5 in · 4,280 mm
Width declared90.6 in · 2,300 mm78.9 in · 2,005 mm+15% DX 4.30
Height declared103.0 in · 2,615 mm97.4 in · 2,475 mm+6% DX 4.30
Ground clearance declared16.7 in · 425 mm15.0 in · 380 mm+12% DX 4.30
Turning radius, braked declared13.7 ft · 4.17 m11.8 ft · 3.60 m+16% DX 4.30
Fuel tank declared132.1 qt · 125 L121.5 qt · 115.0 L+9% DX 4.30

Deutz-Fahr DX 4.30 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr DX 4.30”
  • Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”

Fiat TL 80 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiatagri TL80”