9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.901984–1989No measured PTO figureTractor twoMassey Ferguson MF 3055 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.90 and the MF 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.90 and Massey Ferguson MF 3055 (A), field by field
Field	DX 3.90	MF 3055 (A)	Gap
Engine
Engine power, claimed claimed	74 hp	74 hp	—
Engine declared	KHD F4L 913	Perkins A 4.248	differs
Displacement declared	4.09 L	4.07 L	—
Maximum torque declared	192 lb·ft · 260 N·m	209 lb·ft · 283 N·m	+9% MF 3055 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	11.4 gpm · 43.1 L/min	13.2 gpm · 50.0 L/min	+16% MF 3055 (A)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift, at the coupling points declared	7,275 lb · 3,300 kg	8,940 lb · 4,055 kg	+23% MF 3055 (A)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	8,598 lb · 3,900 kg	+24% MF 3055 (A)
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	91.6 in · 2,327 mm	93.3 in · 2,371 mm	—
Length declared	153.9 in · 3,910 mm	160.2 in · 4,070 mm	—
Width declared	84.2 in · 2,138 mm	80.7 in · 2,049 mm	—
Height, over the cab declared	97.2 in · 2,470 mm	105.1 in · 2,670 mm	+8% MF 3055 (A)
Ground clearance declared	18.0 in · 457 mm	14.6 in · 370 mm	+24% DX 3.90
Fuel tank declared	100.4 qt · 95.0 L	156.4 qt · 148.0 L	+56% MF 3055 (A)

Source

Source