10 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 1601978–1984No measured PTO figureTractor twoSteyr 8165 a1986–1993No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the 8165 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and Steyr 8165 a, field by field
Field	DX 160	8165 a	Gap
Engine
Engine power, claimed claimed	148.0 hp	148.0 hp	—
Engine declared	KHD BF6L 913	Steyr WD 612.86	differs
Displacement declared	6.13 L	6.60 L	+8% 8165 a
Maximum torque declared	393 lb·ft · 533 N·m	438 lb·ft · 594 N·m	+11% 8165 a
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	15.4 gpm · 58.4 L/min	13.3 gpm · 50.2 L/min	+16% DX 160
Pressure declared	3,771 psi · 260 bar	3,553 psi · 245 bar	+6% DX 160
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	12,291 lb · 5,575 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	103.6 in · 2,631 mm	107.1 in · 2,720 mm	—
Length declared	185.4 in · 4,710 mm	180.0 in · 4,571 mm	—
Width declared	93.3 in · 2,370 mm	98.0 in · 2,490 mm	—
Height, over the cab declared	107.5 in · 2,730 mm	115.0 in · 2,920 mm	+7% 8165 a
Ground clearance declared	23.8 in · 605 mm	18.7 in · 475 mm	+27% DX 160
Turning radius, braked declared	14.7 ft · 4.47 m	15.9 ft · 4.85 m	+9% 8165 a
Fuel tank declared	158.5 qt · 150 L	177.5 qt · 168.0 L	+12% 8165 a

Source

Source