14 material differences

Tractor oneDeutz-Fahr DX 1601978–1984No measured PTO figureTractor twoJohn Deere 7700 (A)1992–1997No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the 7700 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and John Deere 7700 (A), field by field
Field	DX 160	7700 (A)	Gap
Engine
Engine power, claimed claimed	148.0 hp	148.0 hp	—
Engine declared	KHD BF6L 913	John Deere 6.076 TRW-31	differs
Displacement declared	6.13 L	7.63 L	+24% 7700 (A)
Maximum torque declared	393 lb·ft · 533 N·m	448 lb·ft · 607 N·m	+14% 7700 (A)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	15.4 gpm · 58.4 L/min	25.8 gpm · 97.7 L/min	+67% 7700 (A)
Pressure declared	3,771 psi · 260 bar	2,857–3,002 psi · 197–207 bar	differs
Three-point lift, at the coupling points declared	14,330 lb · 6,500 kg	12,258 lb · 5,560 kg	+17% DX 160
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	14,352 lb · 6,510 kg	+21% 7700 (A)
Maximum permissible mass declared	18,739 lb · 8,500 kg	25,353 lb · 11,500 kg	+35% 7700 (A)
Wheelbase declared	103.6 in · 2,631 mm	110.2 in · 2,800 mm	+6% 7700 (A)
Length declared	185.4 in · 4,710 mm	187.2 in · 4,755 mm	—
Width declared	93.3 in · 2,370 mm	96.0 in · 2,438 mm	—
Height, over the cab declared	107.5 in · 2,730 mm	119.0 in · 3,023 mm	+11% 7700 (A)
Ground clearance declared	23.8 in · 605 mm	20.3 in · 515 mm	+17% DX 160
Turning radius, braked declared	14.7 ft · 4.47 m	—	—
Fuel tank declared	158.5 qt · 150 L	363.5 qt · 344.0 L	+129% 7700 (A)

Source

Source