Deutz-Fahr DX 160 vs International Harvester Farmall 1456

9 material differences · fewer than 12

Tractor one

1978–1984

No measured PTO figure

Tractor two

1969–1971

No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the Farmall 1456 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and International Harvester Farmall 1456, field by field
Field	DX 160	Farmall 1456	Gap
Engine
Engine power, claimed claimed	148.0 hp	132.2 hp	+12% DX 160
Engine declared	KHD BF6L 913	INTERNATIONAL HARVESTER DT-407	differs
Displacement declared	6.13 L	6.67 L	+9% Farmall 1456
Maximum torque declared	393 lb·ft · 533 N·m	—	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	15.4 gpm · 58.4 L/min	—	—
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	—	—
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	12,800 lb · 5,806 kg	+8% Farmall 1456
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	103.6 in · 2,631 mm	104.8 in · 2,662 mm	—
Length declared	185.4 in · 4,710 mm	164.0 in · 4,166 mm	+13% DX 160
Width declared	93.3 in · 2,370 mm	92.0 in · 2,337 mm	—
Height declared	107.5 in · 2,730 mm	86.0 in · 2,184 mm	+25% DX 160
Ground clearance declared	23.8 in · 605 mm	23.5 in · 597 mm	—
Turning radius, braked declared	14.7 ft · 4.47 m	11.7 ft · 3.56 m	+26% DX 160
Fuel tank declared	158.5 qt · 150 L	168.0 qt · 159.0 L	+6% Farmall 1456

Source

Source