Deutz-Fahr DX 160 vs Ford 9000

12 material differences

Tractor one

1978–1984

No measured PTO figure

Tractor two

1969–1972

No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the 9000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and Ford 9000, field by field
Field	DX 160	9000	Gap
Engine
Engine power, claimed claimed	148.0 hp	145.0 hp	—
Engine declared	KHD BF6L 913	Ford 401	differs
Displacement declared	6.13 L	6.58 L	+7% 9000
Maximum torque declared	393 lb·ft · 533 N·m	372 lb·ft · 504 N·m	+6% DX 160
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	15.4 gpm · 58.4 L/min	16.0 gpm · 60.6 L/min	—
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	7,055 lb · 3,200 kg	+103% DX 160
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	9,800 lb · 4,445 kg	+21% DX 160
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	103.6 in · 2,631 mm	91.5 in · 2,324 mm	+13% DX 160
Length declared	185.4 in · 4,710 mm	151.0 in · 3,835 mm	+23% DX 160
Width declared	93.3 in · 2,370 mm	91.1 in · 2,314 mm	—
Height declared	107.5 in · 2,730 mm	74.1 in · 1,882 mm	+45% DX 160
Ground clearance declared	23.8 in · 605 mm	25.3 in · 643 mm	+6% 9000
Turning radius, braked declared	14.7 ft · 4.47 m	11.0 ft · 3.35 m	+33% DX 160
Fuel tank declared	158.5 qt · 150 L	172.0 qt · 162.8 L	+9% 9000

Source

Source