Deutz-Fahr DX 160 vs Fiat 140-90 (DT)

11 material differences · fewer than 12

Tractor one

1978–1984

No measured PTO figure

Tractor two

1984–1993

No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the 140-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and Fiat 140-90 (DT), field by field
Field	DX 160	140-90 (DT)	Gap
Engine
Engine power, claimed claimed	148.0 hp	138 hp	+7% DX 160
Engine declared	KHD BF6L 913	FIAT-IVECO 8065.25.000	differs
Displacement declared	6.13 L	5.86 L	—
Maximum torque declared	393 lb·ft · 533 N·m	343 lb·ft · 465 N·m	+15% DX 160
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	15.4 gpm · 58.4 L/min	13.4 gpm · 50.8 L/min	+15% DX 160
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	12,809 lb · 5,810 kg	+8% 140-90 (DT)
Maximum permissible mass declared	18,739 lb · 8,500 kg	19,842 lb · 9,000 kg	+6% 140-90 (DT)
Wheelbase declared	103.6 in · 2,631 mm	108.3 in · 2,750 mm	—
Length declared	185.4 in · 4,710 mm	180.3 in · 4,580 mm	—
Width declared	93.3 in · 2,370 mm	80.7 in · 2,050 mm	+16% DX 160
Height declared	107.5 in · 2,730 mm	111.8 in · 2,840 mm	—
Ground clearance declared	23.8 in · 605 mm	26.2 in · 665 mm	+10% 140-90 (DT)
Turning radius, braked declared	14.7 ft · 4.47 m	12.9 ft · 3.93 m	+14% DX 160
Fuel tank declared	158.5 qt · 150 L	190.2 qt · 180.0 L	+20% 140-90 (DT)

Source

Source