Deutz-Fahr DX 140 or SAME Trident 130?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DX 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Trident 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr DX 140 suits loader and hydraulic implement work better on this data: 13% (750 kg / 1,653 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr DX 140 and SAME Trident 130, with the call on each
QuestionDX 140Trident 130Call
Which puts more power through the PTO shaft?91.5 kW (122.7 hp)Traktorenlexikon, “Deutz-Fahr DX 140”91.9 kW (123.2 hp)Traktorenlexikon, “SAME Trident 130”Not comparableNot comparable on power at the PTO shaft: the DX 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Trident 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the DX 140 and the Trident 130.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the DX 140 and the Trident 130.
Which pumps more oil for implements?—38.0 L/min (10.0 gpm)Traktorenlexikon, “SAME Trident 130”No figureNo call on hydraulic flow: no figure on record for the DX 140.
Which lifts more on the three-point hitch?6,500 kg (14,330 lb)Traktorenlexikon, “Deutz-Fahr DX 140”5,750 kg (12,677 lb)Traktorenlexikon, “SAME Trident 130”AheadThe Deutz-Fahr DX 140 has 13% more lift (750 kg / 1,653 lb) than the SAME Trident 130 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,400 kg (11,905 lb)Traktorenlexikon, “Deutz-Fahr DX 140”4,050 kg (8,929 lb)Traktorenlexikon, “SAME Trident 130”Ahead (a fact, not an advantage)The Deutz-Fahr DX 140 is 33% heavier (1,350 kg / 2,976 lb) than the SAME Trident 130 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the DX 140 and the Trident 130.
Which has the wider choice of gears?12Traktorenlexikon, “Deutz-Fahr DX 140”12 to 24Traktorenlexikon, “SAME Trident 130”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the DX 140 and the Trident 130.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr DX 140”30 km/h (18.6 mph)Traktorenlexikon, “SAME Trident 130”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Deutz-Fahr DX 140”540/1000 rpmTraktorenlexikon, “SAME Trident 130”AheadThe SAME Trident 130 offers 540 rpm at the PTO, which the Deutz-Fahr DX 140 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr DX 140”independentTraktorenlexikon, “SAME Trident 130”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr DX 140”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Trident 130”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1978–19801981–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr DX 140 has 13% more lift (750 kg / 1,653 lb) than the SAME Trident 130 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr DX 140 is 33% heavier (1,350 kg / 2,976 lb) than the SAME Trident 130 (both unladen weight, as stated by the source).
  • The SAME Trident 130 offers 540 rpm at the PTO, which the Deutz-Fahr DX 140 does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the DX 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Trident 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources