13 material differences
Tractor oneDeutz-Fahr DX 1401978–1980No measured PTO figureTractor twoSAME Buffalo 130 (DT)1978–1982No measured PTO figure
Which should you choose?
Read our verdict on the DX 140 and the Buffalo 130 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | DX 140 | Buffalo 130 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 122.7 hp | 122.3 hp | — |
| Engine declared | KHD BF6L 913 | SAME DA 1056 P | differs |
| Displacement declared | 6.13 L | 6.23 L | — |
| Maximum torque declared | 356 lb·ft · 483 N·m | 295 lb·ft · 400 N·m | +21% DX 140 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal-operated dry single clutch | Pedal operated dry BORG & BECK single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.2 gpm · 35.0 L/min | — |
| Three-point lift, at the coupling points declared | 14,330 lb · 6,500 kg | 10,071 lb · 4,568 kg | +42% DX 140 |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,905 lb · 5,400 kg | 9,480 lb · 4,300 kg | +26% DX 140 |
| Wheelbase declared | 111.5 in · 2,831 mm | 104.7 in · 2,660 mm | +6% DX 140 |
| Length declared | 185.7 in · 4,716 mm | 170.1 in · 4,320 mm | +9% DX 140 |
| Width declared | 93.3 in · 2,370 mm | 85.4–113.0 in · 2,170–2,870 mm | differs |
| Ground clearance declared | 24.4 in · 620 mm | 20.9 in · 530 mm | +17% DX 140 |
| Turning radius, braked declared | 14.7 ft · 4.47 m | 13.5 ft · 4.10 m | +9% DX 140 |
| Fuel tank declared | 163.8 qt · 155 L | 147.9 qt · 140.0 L | +11% DX 140 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 140 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 140”
- Source: Traktorenlexikon, “Deutz-Fahr DX 160”
SAME Buffalo 130 (DT) sources
Source
- Source: Traktorenlexikon, “SAME Buffalo 130”
- Source: Traktorenlexikon, “SAME Drago 120”