Deutz-Fahr DX 110 or SAME Tiger 100 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DX 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Tiger 100 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr DX 110 suits loader and hydraulic implement work better on this data: 59% (20.7 L/min / 5.5 gpm) more hydraulic flow and 75% (2,210 kg / 4,872 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr DX 110 and SAME Tiger 100 (DT), with the call on each
QuestionDX 110Tiger 100 (DT)Call
Which puts more power through the PTO shaft?75 kW (101 hp)Traktorenlexikon, “Deutz-Fahr DX 110”75 kW (101 hp)Traktorenlexikon, “SAME Tiger 100”Not comparableNot comparable on power at the PTO shaft: the DX 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Tiger 100 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the DX 110 and the Tiger 100 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the DX 110 and the Tiger 100 (DT).
Which pumps more oil for implements?55.7 L/min (14.7 gpm)Traktorenlexikon, “Deutz-Fahr DX 110”35.0 L/min (9.2 gpm)Traktorenlexikon, “SAME Tiger 100”AheadThe Deutz-Fahr DX 110 has 59% more hydraulic flow (20.7 L/min / 5.5 gpm) than the SAME Tiger 100 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,150 kg (11,354 lb)Traktorenlexikon, “Deutz-Fahr DX 110”2,940 kg (6,482 lb)Traktorenlexikon, “SAME Tiger 100”AheadThe Deutz-Fahr DX 110 has 75% more lift (2,210 kg / 4,872 lb) than the SAME Tiger 100 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,420 kg (9,744 lb)Traktorenlexikon, “Deutz-Fahr DX 110”3,770 kg (8,311 lb)Traktorenlexikon, “SAME Tiger 100”Ahead (a fact, not an advantage)The Deutz-Fahr DX 110 is 17% heavier (650 kg / 1,433 lb) than the SAME Tiger 100 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,800 kg (14,991 lb)Traktorenlexikon, “Deutz-Fahr DX 110”—No figureNo call on maximum permissible mass: no figure on record for the Tiger 100 (DT).
Which has the wider choice of gears?12 to 15Traktorenlexikon, “Deutz-Fahr DX 110”12 to 24Traktorenlexikon, “SAME Tiger 100”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the DX 110 and the Tiger 100 (DT).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr DX 110”25 km/h (15.5 mph)Traktorenlexikon, “SAME Tiger 100”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr DX 110”540/1000 rpmTraktorenlexikon, “SAME Tiger 100”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr DX 110”independentTraktorenlexikon, “SAME Tiger 100”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr DX 110”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Tiger 100”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1978–19831977–1980EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr DX 110 has 59% more hydraulic flow (20.7 L/min / 5.5 gpm) than the SAME Tiger 100 (DT) (both pump flow, as stated by the source).
  • The Deutz-Fahr DX 110 has 75% more lift (2,210 kg / 4,872 lb) than the SAME Tiger 100 (DT) (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr DX 110 is 17% heavier (650 kg / 1,433 lb) than the SAME Tiger 100 (DT) (both unladen weight, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the DX 110 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Tiger 100 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources