Deutz-Fahr D 6007 (C) or John Deere 2100 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the D 6007 (C) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2100 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The John Deere 2100 (A) suits loader and hydraulic implement work better on this data: 21% (500 kg / 1,102 lb) more three-point lift.
- The John Deere 2100 (A) suits road haulage better on this data: 38% (1,500 kg / 3,307 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | D 6007 (C) | 2100 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 41.95 kW (56.26 hp)Traktorenlexikon, “Deutz-Fahr D 6007” | 42 kW (56 hp)Traktorenlexikon, “John Deere 2100” | Not comparableNot comparable on power at the PTO shaft: the D 6007 (C) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2100 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the D 6007 (C) and the 2100 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the D 6007 (C) and the 2100 (A). |
| Which pumps more oil for implements? | — | 31.8 L/min (8.4 gpm)Traktorenlexikon, “John Deere 2100” | No figureNo call on hydraulic flow: no figure on record for the D 6007 (C). |
| Which lifts more on the three-point hitch? | 2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Fahr D 6007” | 2,900 kg (6,393 lb)Traktorenlexikon, “John Deere 2100” | AheadThe John Deere 2100 (A) has 21% more lift (500 kg / 1,102 lb) than the Deutz-Fahr D 6007 (C) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,410 kg (5,313 lb)Traktorenlexikon, “Deutz-Fahr D 6007” | 2,985 kg (6,581 lb)Traktorenlexikon, “John Deere 2100” | Ahead (a fact, not an advantage)The John Deere 2100 (A) is 24% heavier (575 kg / 1,268 lb) than the Deutz-Fahr D 6007 (C) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Deutz-Fahr D 6007” | 5,500 kg (12,125 lb)Traktorenlexikon, “John Deere 2100” | AheadThe John Deere 2100 (A) has 38% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Deutz-Fahr D 6007 (C) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Deutz-Fahr D 6007” | 10Traktorenlexikon, “John Deere 2100” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the D 6007 (C) and the 2100 (A). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr D 6007” | 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 2100” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr D 6007” | 540/1000 rpmTraktorenlexikon, “John Deere 2100” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the D 6007 (C) and the 2100 (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr D 6007” | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 2100” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1984 | 1993–1996 | Ahead (a fact, not an advantage)The John Deere 2100 (A) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The John Deere 2100 (A) has 21% more lift (500 kg / 1,102 lb) than the Deutz-Fahr D 6007 (C) (both lift at the hitch ends, as stated by the source).
- The John Deere 2100 (A) is 24% heavier (575 kg / 1,268 lb) than the Deutz-Fahr D 6007 (C) (both unladen weight, as stated by the source).
- The John Deere 2100 (A) has 38% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Deutz-Fahr D 6007 (C) (both maximum permissible mass, as stated by the source).
- The John Deere 2100 (A) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the D 6007 (C) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2100 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources