Deutz-Fahr Agrotron 4.90 vs Massey Ferguson MF 698
4 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agrotron 4.90 and the MF 698 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Agrotron 4.90 | MF 698 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 87 hp | — |
| Engine declared | Deutz BF4M 1012 EC | Perkins A 4.318.2 | differs |
| Displacement declared | 3.19 L | 5.21 L | +63% MF 698 |
| Maximum torque declared | 257 lb·ft · 349 N·m | 261 lb·ft · 354 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.1 mph · 29.1 km/h | differs |
| Clutch declared | — | dry disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Constant flow | — |
| Three-point lift at ends declared | 13,713 lb · 6,220 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,171 lb · 4,160 kg | 7,716 lb · 3,500 kg | +19% Agrotron 4.90 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 95.2 in · 2,419 mm | 95.7 in · 2,430 mm | — |
| Length declared | 157.7 in · 4,005 mm | 160.6 in · 4,080 mm | — |
| Width declared | 79.1 in · 2,008 mm | — | — |
| Height declared | 108.3 in · 2,750 mm | 107.5 in · 2,730 mm | — |
| Ground clearance declared | 19.1 in · 485 mm | — | — |
| Fuel tank declared | 190.2 qt · 180 L | — | — |
Deutz-Fahr Agrotron 4.90 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 4.90”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 100”
Massey Ferguson MF 698 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 698”