6 material differences · fewer than 12
Tractor oneDeutz-Fahr D 7207 (C)1980–1984No measured PTO figureTractor twoSchlüter Compact 750 V41984No measured PTO figure
Which should you choose?
Read our verdict on the D 7207 (C) and the Compact 750 V4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D 7207 (C) | Compact 750 V4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68 hp | 68.7 hp | — |
| Engine declared | KHD F4L 912 | MAN D 0224 ME 51 | differs |
| Displacement declared | 3.77 L | 3.79 L | — |
| Maximum torque declared | 181 lb·ft · 245 N·m | 195 lb·ft · 265 N·m | +8% Compact 750 V4 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 23.8 mph · 38.3 km/h | differs |
| Clutch declared | Independent dry Fichtel & Sachs double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.5 gpm · 39.6 L/min | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,437 lb · 2,920 kg | 8,598 lb · 3,900 kg | +34% Compact 750 V4 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 95.0 in · 2,414 mm | 94.5 in · 2,400 mm | — |
| Length declared | 158.3 in · 4,020 mm | 164.2 in · 4,170 mm | — |
| Width declared | 78.3 in · 1,990 mm | 77.6 in · 1,970 mm | — |
| Ground clearance declared | 22.8 in · 580 mm | 18.5 in · 470 mm | +23% D 7207 (C) |
| Turning radius, braked declared | 12.5 ft · 3.81 m | 13.1 ft · 4.00 m | — |
| Fuel tank declared | 95.1–97.2 qt · 90–92 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 7207 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 7207”
- Source: Traktorenlexikon, “Deutz D 6006”
Schlüter Compact 750 V4 sources
- Source: Traktorenlexikon, “Schlüter Compact 750V 4”