9 material differences · fewer than 12

Tractor oneDeutz-Fahr D 6907 A ( C )1983–1984No measured PTO figureTractor twoSAME Golden 65 Compatto1998–200362.9 hpMeasured at the PTO · OECD Test 1798

Which should you choose?

Read our verdict on the D 6907 A ( C ) and the Golden 65 Compatto → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 1 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6907 A ( C ) and SAME Golden 65 Compatto, field by field
FieldD 6907 A ( C )Golden 65 CompattoGap
Measured performance
PTO power, measured measured—62.9 hp—
Drawbar power, measured measured—52.0 hp—
Engine
Engine power, claimed claimed68 hp——
Engine declaredKHD F4L 912Same Deutz-Fahr Group 1000.3 AT1differs
Displacement declared3.77 L3.00 L+26% D 6907 A ( C )
Maximum torque declared175 lb·ft · 237 N·m167 lb·ft · 226.6 N·m—
Transmission
Top speed declared15.5–18.6 mph · 25–30 km/h24.9 mph · 40 km/hdiffers
Clutch declared—pedal-operated dry single-plate clutch—
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared—9.1 gpm · 34.4 L/min—
Pressure declared—3,118 psi · 215 bar—
Rear PTO speeds declared—540/1000 rpm—
Weight & dimensions
Unladen weight declared6,393 lb · 2,900 kg4,850 lb · 2,200 kg+32% D 6907 A ( C )
Maximum permissible mass declared8,818 lb · 4,000 kg——
Wheelbase declared85.8 in · 2,180 mm75.8 in · 1,926 mm+13% D 6907 A ( C )
Length declared144.3 in · 3,664 mm135.1 in · 3,431 mm+7% D 6907 A ( C )
Width declared81.1 in · 2,060 mm50.8–64.6 in · 1,290–1,640 mmdiffers
Ground clearance declared15.0 in · 380 mm9.1 in · 230 mm+65% D 6907 A ( C )
Turning radius, braked declared—13.1 ft · 4.00 m—
Fuel tank declared95.1 qt · 90 L58.1 qt · 55.0 L+64% D 6907 A ( C )

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr D 6907 A ( C ) sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr D 6907”
  • Source: Traktorenlexikon, “Deutz D 6006”

SAME Golden 65 Compatto sources

Source
  • Source: OECD test report 1798, 1998
  • Source: Traktorenlexikon, “SAME Golden 65 (DT) Compatto”