Deutz-Fahr D 6907 A ( C ) vs Renault 85-12 TX

9 material differences · fewer than 12

Tractor one

1983–1984

No measured PTO figure

Tractor two

1986–1989

No measured PTO figure

Which should you choose?

Read our verdict on the D 6907 A ( C ) and the 85-12 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6907 A ( C ) and Renault 85-12 TX, field by field
Field	D 6907 A ( C )	85-12 TX	Gap
Engine
Engine power, claimed claimed	68 hp	77.0 hp	+13% 85-12 TX
Engine declared	KHD F4L 912	MWM D 226-4	differs
Displacement declared	3.77 L	4.15 L	+10% 85-12 TX
Maximum torque declared	175 lb·ft · 237 N·m	181 lb·ft · 245 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry LuK double clutch type 310/310 G	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	10.9 gpm · 41.4 L/min	—
Pressure declared	—	1,595 psi · 110 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	8,433 lb · 3,825 kg	+59% 85-12 TX
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,393 lb · 2,900 kg	7,507 lb · 3,405 kg	+17% 85-12 TX
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	85.8 in · 2,180 mm	95.6 in · 2,428 mm	+11% 85-12 TX
Length declared	144.3 in · 3,664 mm	154.9 in · 3,934 mm	+7% 85-12 TX
Width declared	81.1 in · 2,060 mm	78.0 in · 1,980 mm	—
Height declared	96.6 in · 2,454 mm	109.3 in · 2,775 mm	+13% 85-12 TX
Ground clearance declared	15.0 in · 380 mm	14.8 in · 377 mm	—
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	95.1 qt · 90 L	108.8 qt · 103.0 L	+14% 85-12 TX

Source

Source