Deutz-Fahr D 6907 A ( C ) or Massey Ferguson MF 590 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Massey Ferguson 590 (A): three-point lift.

  • The Massey Ferguson 590 (A) suits loader and hydraulic implement work better on this data: 21% (500 kg / 1,102 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr D 6907 A ( C ) and Massey Ferguson MF 590 (A), with the call on each
QuestionD 6907 A ( C )MF 590 (A)Call
Which puts more power through the PTO shaft?48.0 kW (64.4 hp)Traktorenlexikon, “Deutz-Fahr D 6907”47.4 kW (63.6 hp)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the D 6907 A ( C ) and the MF 590 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the D 6907 A ( C ) and the MF 590 (A).
Which pumps more oil for implements?—62.5 L/min (16.5 gpm)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”No figureNo call on hydraulic flow: no figure on record for the D 6907 A ( C ).
Which lifts more on the three-point hitch?2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Fahr D 6907”2,900 kg (6,393 lb)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”AheadThe Massey Ferguson 590 (A) has 21% more lift (500 kg / 1,102 lb) than the Deutz-Fahr D 6907 A ( C ) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,900 kg (6,393 lb)Traktorenlexikon, “Deutz-Fahr D 6907”3,290 kg (7,253 lb)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”Ahead (a fact, not an advantage)The Massey Ferguson 590 (A) is 13% heavier (390 kg / 860 lb) than the Deutz-Fahr D 6907 A ( C ) (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,000 kg (8,818 lb)Traktorenlexikon, “Deutz-Fahr D 6907”—No figureNo call on maximum permissible mass: no figure on record for the MF 590 (A).
Which has the wider choice of gears?12Traktorenlexikon, “Deutz-Fahr D 6907”8 to 12Traktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the D 6907 A ( C ) and the MF 590 (A).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr D 6907”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?—540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 590 & 590A”No figureNo call on PTO speeds: no standard PTO speed stated for the D 6907 A ( C ).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Massey Ferguson MF 590 & 590A”No figureNo call on PTO independence: not stated for the D 6907 A ( C ).
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr D 6907”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 590 & 590A”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1983–19841976–1982Ahead (a fact, not an advantage)The Deutz-Fahr D 6907 A ( C ) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 590 (A) has 21% more lift (500 kg / 1,102 lb) than the Deutz-Fahr D 6907 A ( C ) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 590 (A) is 13% heavier (390 kg / 860 lb) than the Deutz-Fahr D 6907 A ( C ) (both unladen weight, as stated by the source).
  • The Deutz-Fahr D 6907 A ( C ) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources