6 material differences · fewer than 12
Tractor oneDeutz-Fahr D 6807 (C)1981–1982No measured PTO figureTractor twoInternational Harvester 743XL1981–1991No measured PTO figure
Which should you choose?
Read our verdict on the D 6807 (C) and the 743XL → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | D 6807 (C) | 743XL | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66 hp | 66 hp | — |
| Engine declared | KHD F4L 912 | IH D-239 | differs |
| Displacement declared | 3.77 L | 3.91 L | — |
| Maximum torque declared | 176 lb·ft · 238 N·m | 173 lb·ft · 235 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | dry double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 11.1 gpm · 42.0 L/min | 8.6 gpm · 32.6 L/min | +29% D 6807 (C) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,305 lb · 2,860 kg | 7,187–7,562 lb · 3,260–3,430 kg | differs |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | 12,125 lb · 5,500 kg | +10% 743XL |
| Wheelbase declared | 85.4 in · 2,170 mm | 87.6 in · 2,226 mm | — |
| Length declared | 148.0 in · 3,760 mm | 146.9 in · 3,730 mm | — |
| Width declared | 78.3 in · 1,990 mm | 80.7 in · 2,050 mm | — |
| Ground clearance declared | 18.9 in · 480 mm | 18.0 in · 457 mm | — |
| Turning radius, braked declared | 11.9 ft · 3.62 m | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 97.2 qt · 92 L | 112.0 qt · 106 L | +15% 743XL |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6807 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 6807”
- Source: Traktorenlexikon, “Deutz D 6006”
International Harvester 743XL sources
- Source: Traktorenlexikon, “IHC 743XL”
- Source: Traktorenlexikon, “IHC 743”