Deutz-Fahr D 6507 (C) vs SAME Explorer 65 (DT)

9 material differences · fewer than 12

Tractor one

1982–1984

No measured PTO figure

Tractor two

1983–1986

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the Explorer 65 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and SAME Explorer 65 (DT), field by field
Field	D 6507 (C)	Explorer 65 (DT)	Gap
Engine
Engine power, claimed claimed	62 hp	64.1 hp	—
Engine declared	KHD F4L 912	SAME 916.4 A	differs
Displacement declared	3.77 L	3.67 L	—
Maximum torque declared	174 lb·ft · 236 N·m	153 lb·ft · 208 N·m	+13% D 6507 (C)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.4 gpm · 31.8 L/min	9.6 gpm · 36.5 L/min	+15% Explorer 65 (DT)
Pressure declared	—	2,611 psi · 180 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	7,562 lb · 3,430 kg	+43% Explorer 65 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,379 lb · 2,440 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	91.5 in · 2,325 mm	+9% Explorer 65 (DT)
Length declared	148.0 in · 3,760 mm	151.6 in · 3,850 mm	—
Width declared	81.1 in · 2,060 mm	76.8 in · 1,950 mm	+6% D 6507 (C)
Height declared	96.5 in · 2,450 mm	96.5 in · 2,450 mm	—
Ground clearance declared	19.3 in · 490 mm	17.9 in · 455 mm	+8% D 6507 (C)
Turning radius, braked declared	11.7 ft · 3.58 m	11.0 ft · 3.35 m	+7% D 6507 (C)
Fuel tank declared	74.0 qt · 70 L	70.8 qt · 67.0 L	—

Source

Source