Deutz-Fahr D 6507 (C) vs Leyland 270

7 material differences · fewer than 12

Tractor one

1982–1984

No measured PTO figure

Tractor two

1973–1975

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the 270 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and Leyland 270, field by field
Field	D 6507 (C)	270	Gap
Engine
Engine power, claimed claimed	62 hp	70.0 hp	+13% 270
Engine declared	KHD F4L 912	LEYLAND-MOTORS 4/98 NT	differs
Displacement declared	3.77 L	3.77 L	—
Maximum torque declared	174 lb·ft · 236 N·m	190 lb·ft · 258 N·m	+9% 270
Transmission
Top speed declared	18.6 mph · 30 km/h	16.2 mph · 26 km/h	+15% D 6507 (C)
Clutch declared	Independent dry double clutch	Dry Borg & Beck double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	8.5 gpm · 32.3 L/min	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	3,999 lb · 1,814 kg	+32% D 6507 (C)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,765 lb · 2,615 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	80.2 in · 2,038 mm	—
Length declared	148.0 in · 3,760 mm	144.9 in · 3,680 mm	—
Width declared	81.1 in · 2,060 mm	80.3 in · 2,040 mm	—
Height declared	96.5 in · 2,450 mm	94.9 in · 2,410 mm	—
Ground clearance declared	19.3 in · 490 mm	16.9 in · 429 mm	+14% D 6507 (C)
Turning radius, braked declared	11.7 ft · 3.58 m	11.0 ft · 3.35 m	+7% D 6507 (C)
Fuel tank declared	74.0 qt · 70 L	72.0 qt · 68.1 L	—

Source

Source