12 material differences
Tractor oneDeutz-Fahr D 6507 (C)1982–1984No measured PTO figureTractor twoJohn Deere 2250 (A)1986–1994No measured PTO figure
Which should you choose?
Read our verdict on the D 6507 (C) and the 2250 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 6507 (C) | 2250 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 62 hp | 61.2 hp | — |
| Engine declared | KHD F4L 912 | John Deere 4.239 DL-009 | differs |
| Displacement declared | 3.77 L | 3.92 L | — |
| Maximum torque declared | 174 lb·ft · 236 N·m | 164 lb·ft · 222 N·m | +6% D 6507 (C) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Closed centre | differs |
| Pump flow declared | 8.4 gpm · 31.8 L/min | 13.9 gpm · 52.7 L/min | +66% 2250 (A) |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,578 lb · 2,530 kg | 6,724 lb · 3,050 kg | +21% 2250 (A) |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | 10,582 lb · 4,800 kg | +20% 2250 (A) |
| Wheelbase declared | 83.7 in · 2,125 mm | 89.2 in · 2,266 mm | +7% 2250 (A) |
| Length declared | 148.0 in · 3,760 mm | 165.1 in · 4,193 mm | +12% 2250 (A) |
| Width declared | 81.1 in · 2,060 mm | 79.9 in · 2,029 mm | — |
| Ground clearance declared | 19.3 in · 490 mm | 25.3 in · 642 mm | +31% 2250 (A) |
| Turning radius, braked declared | 11.7 ft · 3.58 m | — | — |
| Fuel tank declared | 74.0 qt · 70 L | 88.8–143.7 qt · 84.0–136.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6507 (C) sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr D 6507”
- Source: Traktorenlexikon, “Deutz D 6006”
John Deere 2250 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2250”