Deutz-Fahr D 6507 (C) vs Ford 5030 (A)

11 material differences · fewer than 12

Tractor one

1982–1984

No measured PTO figure

Tractor two

1992–1996

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the 5030 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and Ford 5030 (A), field by field
Field	D 6507 (C)	5030 (A)	Gap
Engine
Engine power, claimed claimed	62 hp	69.1 hp	+12% 5030 (A)
Engine declared	KHD F4L 912	Ford C 256 CID-NA	differs
Displacement declared	3.77 L	4.19 L	+11% 5030 (A)
Maximum torque declared	174 lb·ft · 236 N·m	176 lb·ft · 239 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	Pedal operated dry AP single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	8.4 gpm · 31.8 L/min	9.2 gpm · 34.8 L/min	+9% 5030 (A)
Pressure declared	—	1,508 psi · 104 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,381 lb · 1,987 kg	+21% D 6507 (C)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	6,217 lb · 2,820 kg	+11% 5030 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	89.6 in · 2,276 mm	+7% 5030 (A)
Length declared	148.0 in · 3,760 mm	143.7 in · 3,650 mm	—
Width declared	81.1 in · 2,060 mm	72.2 in · 1,835 mm	+12% D 6507 (C)
Height declared	96.5 in · 2,450 mm	100.3 in · 2,548 mm	—
Ground clearance declared	19.3 in · 490 mm	13.9 in · 353 mm	+39% D 6507 (C)
Turning radius, braked declared	11.7 ft · 3.58 m	—	—
Fuel tank declared	74.0 qt · 70 L	69.4 qt · 65.7 L	+7% D 6507 (C)

Source

Source