Deutz-Fahr D 6507 (C) vs Fiat L 65 (DT)

12 material differences

Tractor one

1982–1984

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the L 65 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and Fiat L 65 (DT), field by field
Field	D 6507 (C)	L 65 (DT)	Gap
Engine
Engine power, claimed claimed	62 hp	64.1 hp	—
Engine declared	KHD F4L 912	Fiat-Iveco 8045.06	differs
Displacement declared	3.77 L	3.61 L	—
Maximum torque declared	174 lb·ft · 236 N·m	146 lb·ft · 198 N·m	+19% D 6507 (C)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	11.8 gpm · 44.5 L/min	+40% L 65 (DT)
Pressure declared	—	2,103 psi · 145 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,393 lb · 2,900 kg	+21% L 65 (DT)
Rear PTO speeds declared	540 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	8,620 lb · 3,910 kg	+55% L 65 (DT)
Maximum permissible mass declared	8,818 lb · 4,000 kg	11,464 lb · 5,200 kg	+30% L 65 (DT)
Wheelbase declared	83.7 in · 2,125 mm	92.2 in · 2,342 mm	+10% L 65 (DT)
Length declared	148.0 in · 3,760 mm	153.9 in · 3,910 mm	—
Width declared	81.1 in · 2,060 mm	83.5 in · 2,120 mm	—
Height declared	96.5 in · 2,450 mm	98.4 in · 2,500 mm	—
Ground clearance declared	19.3 in · 490 mm	18.9 in · 480 mm	—
Turning radius, braked declared	11.7 ft · 3.58 m	12.4 ft · 3.79 m	+6% L 65 (DT)
Fuel tank declared	74.0 qt · 70 L	84.5 qt · 80.0 L	+14% L 65 (DT)

Source

Source