Deutz-Fahr D 6207 (C) vs Steyr 768 (a)

11 material differences · fewer than 12

Tractor one

1981–1982

No measured PTO figure

Tractor two

1977–1979

No measured PTO figure

Which should you choose?

Read our verdict on the D 6207 (C) and the 768 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6207 (C) and Steyr 768 (a), field by field
Field	D 6207 (C)	768 (a)	Gap
Engine
Engine power, claimed claimed	59 hp	63.2 hp	+7% 768 (a)
Engine declared	KHD F4L 912	Steyr WD-408.43	differs
Displacement declared	3.77 L	3.14 L	+20% D 6207 (C)
Maximum torque declared	169 lb·ft · 229 N·m	159 lb·ft · 216 N·m	+6% D 6207 (C)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry Fichtel & Sachs single-disc clutch, pedal-operated driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	9.0 gpm · 34.0 L/min	—
Pressure declared	—	2,489 psi · 172 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	5,291 lb · 2,400 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,644 lb · 2,560 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	83.9 in · 2,130 mm	—
Length declared	148.0 in · 3,760 mm	139.6 in · 3,547 mm	+6% D 6207 (C)
Width declared	81.1 in · 2,060 mm	66.2 in · 1,682 mm	+22% D 6207 (C)
Height declared	97.6 in · 2,480 mm	88.2 in · 2,240 mm	+11% D 6207 (C)
Ground clearance declared	20.9 in · 530 mm	15.7 in · 400 mm	+33% D 6207 (C)
Turning radius, braked declared	11.9 ft · 3.63 m	11.5 ft · 3.50 m	—
Fuel tank declared	74.0 qt · 70 L	87.7 qt · 83.0 L	+19% 768 (a)

Source

Source