9 material differences · fewer than 12
Tractor oneDeutz-Fahr D 6207 (C)1981–1982No measured PTO figureTractor twoSAME Minitaurus 601978–1984No measured PTO figure
Which should you choose?
Read our verdict on the D 6207 (C) and the Minitaurus 60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 6207 (C) | Minitaurus 60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59 hp | 59.1 hp | — |
| Engine declared | KHD F4L 912 | SAME DA 1053 P | differs |
| Displacement declared | 3.77 L | 3.12 L | +21% D 6207 (C) |
| Maximum torque declared | 169 lb·ft · 229 N·m | 162 lb·ft · 220 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5–18.6 mph · 25–30 km/h | — |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.3 gpm · 35.3 L/min | 6.3 gpm · 24.0 L/min | +47% D 6207 (C) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,578 lb · 2,530 kg | 4,828 lb · 2,190 kg | +16% D 6207 (C) |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 83.7 in · 2,125 mm | 84.3 in · 2,140 mm | — |
| Length declared | 148.0 in · 3,760 mm | 137.8 in · 3,500 mm | +7% D 6207 (C) |
| Width declared | 81.1 in · 2,060 mm | 73.8–89.6 in · 1,875–2,275 mm | differs |
| Ground clearance declared | 20.9 in · 530 mm | 16.5 in · 420 mm | +26% D 6207 (C) |
| Turning radius, braked declared | 11.9 ft · 3.63 m | 10.2 ft · 3.10 m | +17% D 6207 (C) |
| Fuel tank declared | 74.0 qt · 70 L | 105.7 qt · 100.0 L | +43% Minitaurus 60 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6207 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 6207”
- Source: Traktorenlexikon, “Deutz D 6006”
SAME Minitaurus 60 sources
- Source: Traktorenlexikon, “SAME Minitaurus 60”
- Source: Traktorenlexikon, “SAME Taurus 60”