Deutz-Fahr D 6207 (C) vs Lamborghini R-653 (DT)

8 material differences · fewer than 12

Tractor one

1981–1982

No measured PTO figure

Tractor two

1980–1985

No measured PTO figure

Which should you choose?

Read our verdict on the D 6207 (C) and the R-653 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6207 (C) and Lamborghini R-653 (DT), field by field
Field	D 6207 (C)	R-653 (DT)	Gap
Engine
Engine power, claimed claimed	59 hp	61.2 hp	—
Engine declared	KHD F4L 912	SAME 1.053 P	differs
Displacement declared	3.77 L	3.12 L	+21% D 6207 (C)
Maximum torque declared	169 lb·ft · 229 N·m	152 lb·ft · 206 N·m	+11% D 6207 (C)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	—	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,204 lb · 2,814 kg	+17% R-653 (DT)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,688 lb · 2,580 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	84.3 in · 2,140 mm	—
Length declared	148.0 in · 3,760 mm	143.7 in · 3,650 mm	—
Width declared	81.1 in · 2,060 mm	66.1 in · 1,680 mm	+23% D 6207 (C)
Height declared	97.6 in · 2,480 mm	92.9 in · 2,360 mm	—
Ground clearance declared	20.9 in · 530 mm	19.7 in · 500 mm	+6% D 6207 (C)
Turning radius, braked declared	11.9 ft · 3.63 m	—	—
Fuel tank declared	74.0 qt · 70 L	74.0 qt · 70.0 L	—

Source

Source