Deutz-Fahr D 6207 (C) vs Fiat 65-56 LM (DT)

10 material differences · fewer than 12

Tractor one

1981–1982

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the D 6207 (C) and the 65-56 LM (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6207 (C) and Fiat 65-56 LM (DT), field by field
Field	D 6207 (C)	65-56 LM (DT)	Gap
Engine
Engine power, claimed claimed	59 hp	64.1 hp	+9% 65-56 LM (DT)
Engine declared	KHD F4L 912	Fiat 8045.06.220 or 320	differs
Displacement declared	3.77 L	3.61 L	—
Maximum torque declared	169 lb·ft · 229 N·m	151 lb·ft · 205 N·m	+12% D 6207 (C)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry LuK or VALEO double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	9.3 gpm · 35.3 L/min	8.7 gpm · 32.8 L/min	+8% D 6207 (C)
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	3,847 lb · 1,745 kg	+38% D 6207 (C)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,004 lb · 2,270 kg	+11% D 6207 (C)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	85.3 in · 2,167 mm	—
Length declared	148.0 in · 3,760 mm	141.7 in · 3,600 mm	—
Width declared	81.1 in · 2,060 mm	71.7 in · 1,820 mm	+13% D 6207 (C)
Height declared	97.6 in · 2,480 mm	95.3 in · 2,420 mm	—
Ground clearance declared	20.9 in · 530 mm	18.9 in · 480 mm	+10% D 6207 (C)
Turning radius, braked declared	11.9 ft · 3.63 m	11.5 ft · 3.51 m	—
Fuel tank declared	74.0 qt · 70 L	63.4 qt · 60.0 L	+17% D 6207 (C)

Source

Source