13 material differences

Tractor oneDeutz-Fahr D 6207 (C)1981–1982No measured PTO figureTractor twoFendt Farmer 260 P/PA (Fendt)1988–1992No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1981–1982; 1988–1992). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6207 (C) and Fendt Farmer 260 P/PA (Fendt), field by field
FieldD 6207 (C)Farmer 260 P/PAGap
Engine
Engine power, claimed claimed59 hp59 hp—
Engine declaredKHD F4L 912KHD F3L 913differs
Displacement declared3.77 L3.06 L+23% D 6207 (C)
Maximum torque declared169 lb·ft · 229 N·m150 lb·ft · 203 N·m+13% D 6207 (C)
Transmission
Top speed declared15.5–18.6 mph · 25–30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredIndependent dry double clutchdual dry clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared9.3 gpm · 35.3 L/min10.8 gpm · 41.0 L/min+16% Farmer 260 P/PA
Rear PTO speeds declared540 rpm540/750 rpmdiffers
Weight & dimensions
Unladen weight declared5,578 lb · 2,530 kg5,159 lb · 2,340 kg+8% D 6207 (C)
Maximum permissible mass declared8,818 lb · 4,000 kg8,818 lb · 4,000 kg—
Wheelbase declared83.7 in · 2,125 mm80.7 in · 2,050 mm—
Length declared148.0 in · 3,760 mm138.4 in · 3,516 mm+7% D 6207 (C)
Width declared81.1 in · 2,060 mm60.4 in · 1,533 mm+34% D 6207 (C)
Ground clearance declared20.9 in · 530 mm10.1 in · 257 mm+106% D 6207 (C)
Turning radius, braked declared11.9 ft · 3.63 m9.7 ft · 2.95 m+23% D 6207 (C)
Fuel tank declared74.0 qt · 70 L63.4 qt · 60 L+17% D 6207 (C)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr D 6207 (C) sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr D 6207”
  • Source: Traktorenlexikon, “Deutz D 6006”

Fendt Farmer 260 P/PA (Fendt) sources

Source
  • Source: Traktorenlexikon, “Fendt Farmer 260 P/PA”
  • Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”