Deutz-Fahr D 3607 or Fiat 400 V/E?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the D 3607 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 400 V/E has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr D 3607 suits loader and hydraulic implement work better on this data: 61% (13.2 L/min / 3.5 gpm) more hydraulic flow and 46% (600 kg / 1,323 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | D 3607 | 400 V/E | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 25 kW (34 hp)Traktorenlexikon, “Deutz-Fahr D 3607” | 25 kW (34 hp)Traktorenlexikon, “Fiat 400 V/E” | Not comparableNot comparable on power at the PTO shaft: the D 3607 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 400 V/E has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the D 3607 and the 400 V/E. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the D 3607 and the 400 V/E. |
| Which pumps more oil for implements? | 35 L/min (9.2 gpm)Traktorenlexikon, “Deutz-Fahr D 3607” | 21.8 L/min (5.8 gpm)Traktorenlexikon, “Fiat 400 V/E” | AheadThe Deutz-Fahr D 3607 has 61% more hydraulic flow (13.2 L/min / 3.5 gpm) than the Fiat 400 V/E (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,900 kg (4,189 lb)Traktorenlexikon, “Deutz-Fahr D 3607” | 1,300 kg (2,866 lb)Traktorenlexikon, “Fiat 400 V/E” | AheadThe Deutz-Fahr D 3607 has 46% more lift (600 kg / 1,323 lb) than the Fiat 400 V/E (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 1,930 kg (4,255 lb)Traktorenlexikon, “Deutz-Fahr D 3607” | 1,610 kg (3,549 lb)Traktorenlexikon, “Fiat 400 V/E” | Ahead (a fact, not an advantage)The Deutz-Fahr D 3607 is 20% heavier (320 kg / 705 lb) than the Fiat 400 V/E (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 3,200 kg (7,055 lb)Traktorenlexikon, “Deutz-Fahr D 3607” | — | No figureNo call on maximum permissible mass: no figure on record for the 400 V/E. |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Deutz-Fahr D 3607” | 6 to 9Traktorenlexikon, “Fiat 400 V/E” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the D 3607 and the 400 V/E. |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr D 3607” | 25 km/h (15.5 mph)Traktorenlexikon, “Fiat 400 V/E” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 600 rpmTraktorenlexikon, “Deutz-Fahr D 3607” | 540 rpmTraktorenlexikon, “Fiat 400 V/E” | No figureNo call on PTO speeds: no standard PTO speed stated for the D 3607. |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr D 3607” | independentTraktorenlexikon, “Fiat 400 V/E” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Deutz-Fahr D 3607” | 2WDTraktorenlexikon, “Fiat 400 V/E” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1982–1988 | 1968–1971 | Ahead (a fact, not an advantage)The Deutz-Fahr D 3607 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr D 3607 has 61% more hydraulic flow (13.2 L/min / 3.5 gpm) than the Fiat 400 V/E (both pump flow, as stated by the source).
- The Deutz-Fahr D 3607 has 46% more lift (600 kg / 1,323 lb) than the Fiat 400 V/E (both lift at the hitch ends, as stated by the source).
- The Deutz-Fahr D 3607 is 20% heavier (320 kg / 705 lb) than the Fiat 400 V/E (both unladen weight, as stated by the source).
- The Deutz-Fahr D 3607 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: all two-wheel drive.
- Not comparable on power at the PTO shaft: the D 3607 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 400 V/E has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO speeds.
← Every figure for both machines, side by side, with sources