Deutz-Fahr AgroXtra 6.07 or Massey Ferguson MF 6160 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the AgroXtra 6.07 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6160 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr AgroXtra 6.07 suits loader and hydraulic implement work better on this data: 11% (530 kg / 1,168 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroXtra 6.07 and Massey Ferguson MF 6160 (A), with the call on each
QuestionAgroXtra 6.07MF 6160 (A)Call
Which puts more power through the PTO shaft?73.6 kW (98.7 hp)Traktorenlexikon, “Deutz-Fahr AgroXtra 6.07”73.6 kW (98.7 hp)Traktorenlexikon, “Massey Ferguson MF 6160”Not comparableNot comparable on power at the PTO shaft: the AgroXtra 6.07 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6160 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroXtra 6.07 and the MF 6160 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the AgroXtra 6.07 and the MF 6160 (A).
Which pumps more oil for implements?—50.4 L/min (13.3 gpm)Traktorenlexikon, “Massey Ferguson MF 6160”No figureNo call on hydraulic flow: no figure on record for the AgroXtra 6.07.
Which lifts more on the three-point hitch?5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 6.07”4,670 kg (10,296 lb)Traktorenlexikon, “Massey Ferguson MF 6160”AheadThe Deutz-Fahr AgroXtra 6.07 has 11% more lift (530 kg / 1,168 lb) than the Massey Ferguson 6160 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,450 kg (9,811 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 6.07”4,410 kg (9,722 lb)Traktorenlexikon, “Massey Ferguson MF 6160”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?—7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 6160”No figureNo call on maximum permissible mass: no figure on record for the AgroXtra 6.07.
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr AgroXtra 6.07”30 to 32Traktorenlexikon, “Massey Ferguson MF 6160”AheadThe Massey Ferguson 6160 (A) has 67% more forward gears (12 gears) than the Deutz-Fahr AgroXtra 6.07 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the AgroXtra 6.07 and the MF 6160 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroXtra 6.07”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6160”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroXtra 6.07”540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6160”AheadThe Deutz-Fahr AgroXtra 6.07 offers 750 rpm at the PTO, which the Massey Ferguson 6160 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroXtra 6.07”independentTraktorenlexikon, “Massey Ferguson MF 6160”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr AgroXtra 6.07”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 6160”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19951995–1999EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr AgroXtra 6.07 has 11% more lift (530 kg / 1,168 lb) than the Massey Ferguson 6160 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 6160 (A) has 67% more forward gears (12 gears) than the Deutz-Fahr AgroXtra 6.07 (both forward gears, as stated by the source).
  • The Deutz-Fahr AgroXtra 6.07 offers 750 rpm at the PTO, which the Massey Ferguson 6160 (A) does not (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the AgroXtra 6.07 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6160 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources