Deutz-Fahr AgroXtra 4.57 or Ford 7740 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Deutz-Fahr AgroXtra 4.57: three-point lift. It is also ahead on PTO speeds.

  • The Deutz-Fahr AgroXtra 4.57 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.
  • The Deutz-Fahr AgroXtra 4.57 suits loader and hydraulic implement work better on this data: 22% (925 kg / 2,039 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroXtra 4.57 and Ford 7740 (A), with the call on each
QuestionAgroXtra 4.577740 (A)Call
Which puts more power through the PTO shaft?62 kW (83 hp)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”61.9 kW (83.0 hp)Traktorenlexikon, “Ford 7740”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroXtra 4.57 and the 7740 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the AgroXtra 4.57 and the 7740 (A).
Which pumps more oil for implements?47.3 L/min (12.5 gpm)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”No figureNo call on hydraulic flow: no figure on record for the 7740 (A).
Which lifts more on the three-point hitch?5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”4,275 kg (9,425 lb)Traktorenlexikon, “Ford 7740”AheadThe Deutz-Fahr AgroXtra 4.57 has 22% more lift (925 kg / 2,039 lb) than the Ford 7740 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,780 kg (8,333 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”3,940 kg (8,686 lb)Traktorenlexikon, “Ford 7740”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,600 kg (14,551 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”No figureNo call on maximum permissible mass: no figure on record for the 7740 (A).
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”12 to 16Traktorenlexikon, “Ford 7740”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the AgroXtra 4.57 and the 7740 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Ford 7740”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroXtra 4.57”540/1000 rpmTraktorenlexikon, “Ford 7740”AheadThe Deutz-Fahr AgroXtra 4.57 offers 750 rpm at the PTO, which the Ford 7740 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroXtra 4.57”independentTraktorenlexikon, “Ford 7740”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr AgroXtra 4.57”2WD / 4WDTraktorenlexikon, “Ford 7740”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1990–19951991–1997EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr AgroXtra 4.57 has 22% more lift (925 kg / 2,039 lb) than the Ford 7740 (A) (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr AgroXtra 4.57 offers 750 rpm at the PTO, which the Ford 7740 (A) does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources