12 material differences
Tractor oneDeutz-Fahr AgroXtra 4.471993–1995No measured PTO figureTractor twoInternational Harvester 7861980–1981No measured PTO figure
Which should you choose?
Read our verdict on the AgroXtra 4.47 and the 786 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | AgroXtra 4.47 | 786 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.7 hp | 79.9 hp | — |
| Engine declared | KHD BF4L 913 T | INTERNATIONAL HARVESTER D-358 | differs |
| Displacement declared | 4.09 L | 5.87 L | +44% 786 |
| Maximum torque declared | 219 lb·ft · 297 N·m | 251 lb·ft · 340 N·m | +14% 786 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal operated DYNA-LIFE clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 19.5 gpm · 74 L/min | 12.0 gpm · 45.5 L/min | +63% AgroXtra 4.47 |
| Rear PTO speeds declared | 540/1000/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,333 lb · 3,780 kg | 11,590 lb · 5,257 kg | +39% 786 |
| Maximum permissible mass declared | 14,551 lb · 6,600 kg | — | — |
| Wheelbase declared | 96.1 in · 2,440 mm | 104.8 in · 2,662 mm | +9% 786 |
| Length declared | 165.9 in · 4,215 mm | 165.0 in · 4,191 mm | — |
| Width declared | 73.6 in · 1,870 mm | 102.0 in · 2,591 mm | +39% 786 |
| Ground clearance declared | 17.7 in · 450 mm | 13.0 in · 330 mm | +36% AgroXtra 4.47 |
| Turning radius, braked declared | 14.2 ft · 4.32 m | 11.9 ft · 3.63 m | +19% AgroXtra 4.47 |
| Fuel tank declared | 137.4 qt · 130 L | 199.7 qt · 189.0 L | +45% 786 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr AgroXtra 4.47 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr AgroXtra 4.47”
- Source: Traktorenlexikon, “Deutz-Fahr DX 4.50”
International Harvester 786 sources
Source
- Source: Traktorenlexikon, “IHC 786”