12 material differences

Tractor oneDeutz-Fahr AgroXtra 3.571991–1996No measured PTO figureTractor twoDeutz-Fahr D 6207 (C)1981–1982No measured PTO figure

Which should you choose?

Read our verdict on the AgroXtra 3.57 and the D 6207 (C) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroXtra 3.57 and Deutz-Fahr D 6207 (C), field by field
FieldAgroXtra 3.57D 6207 (C)Gap
Engine
Engine power, claimed claimed58.9 hp59 hp—
Engine declaredKHD F3L 913KHD F4L 912differs
Displacement declared3.06 L3.77 L+23% D 6207 (C)
Maximum torque declared144 lb·ft · 195 N·m169 lb·ft · 229 N·m+17% D 6207 (C)
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h15.5–18.6 mph · 25–30 km/hdiffers
Clutch declaredIndependent, dry double clutchIndependent dry double clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Pump flow declared10.0 gpm · 38.0 L/min9.3 gpm · 35.3 L/min+8% AgroXtra 3.57
Three-point lift, at the coupling points declared5,291 lb · 2,400 kg5,291 lb · 2,400 kg—
Rear PTO speeds declared540/1000/750 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared7,253 lb · 3,290 kg5,578 lb · 2,530 kg+30% AgroXtra 3.57
Maximum permissible mass declared9,921 lb · 4,500 kg8,818 lb · 4,000 kg+13% AgroXtra 3.57
Wheelbase declared81.9 in · 2,079 mm83.7 in · 2,125 mm—
Length declared144.9 in · 3,680 mm148.0 in · 3,760 mm—
Width declared73.7 in · 1,872 mm81.1 in · 2,060 mm+10% D 6207 (C)
Ground clearance declared14.0 in · 355 mm20.9 in · 530 mm+49% D 6207 (C)
Turning radius, braked declared11.8 ft · 3.60 m11.9 ft · 3.63 m—
Fuel tank declared87.7 qt · 83 L74.0 qt · 70 L+19% AgroXtra 3.57

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr AgroXtra 3.57 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”
  • Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”

Deutz-Fahr D 6207 (C) sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr D 6207”
  • Source: Traktorenlexikon, “Deutz D 6006”